|
|
|
|
| |
|
ExcelMax
Indoor CPE |
|
OVERVIEW
 Axxcelera’s
ExcelMax Indoor CPE is a low cost, self-installable Point to
Multipoint (PMP) CPE designed to operate in the 3.3-3.8 GHz spectrum
and supports a Half Duplex FDD (Frequency Division Duplex) or a TDD
(Time Division Duplex) architecture. The WiMax-2004 compliant Indoor
CPE allows service providers to offer broadband wireless services to
customers in Non Line of Site (NLOS) locations. The ExcelMax CPE 3400
supports a strong suite of Quality of Service (QoS) features,
including Committed Information Rate (CIR), Peak Information Rate (PIR)
and Best Effort services. The CPE supports Call Admission Control (CAC)
features, which allows for scalable carrier class VoIP services and
the IGMP protocol which supports Video Broadcast services. All CPEs in
a service provider network are completely managable remotely by
Axxcelera’s carrier-class Network Management System using SNMP
protocol.
REASONS TO BUY
EXCELMAX BASE STATION
ExcelMax Indoor CPE offers service providers an ability to offer
residential broadband wireless services at rates competitive with
wireline technologies. The self install nature of the indoor CPE
allows Service Providers to sell CPEs from retail outlets since no
professional installation mechanisms are needs for the indoor CPE. Its
multi-service capabilities and QoS features allow service providers to
offer reliable, high quality, revenue generating applications (data,
VoIP and video broadcast) to different customer types (residential,
SoHo, MDU and SME). The mature CPE architecture has been deployed in
large data, voice and video networks and ensures reliable operations
in the field. Axxcelera provides a suite of management, installation,
provisioning and configuration tools which make the installation and
maintenance of the CPE extremely simple.
|
Key Features
- WiMax-2004 Compliant - NLOS operation
- Enhanced NLOS Features: Uplink
Subchannelization; Space Time Coding
- Self Install, Self Configure Indoor CPE
- Half-Duplex FDD and TDD support
- Supports data, voice and video services
- Comprehensive Quality of Service (CIR, PIR,
Priority) and VLAN support
Benefits
- Low cost CPE allows mass residential
rollout
- Self Install feature avoids cost of
professional installation
- Robust, field proven platform
RF SPECIFICATIONS
- Frequency Band - 3.3-3.8 GHz
- Air Interface Standard - 802.16-2004
- Architecture - Point to Multipoint (PMP)
- Duplex Scheme - Half Duplex FDD/TDD
- FDD Duplex Spacing - 100 MHz typical
- RF Channel Sizes - 7 MHz, 3.5 MHz and 1.75
MHz
- Modulation Types - Dynamic Adaptive: 64QAM,
16QAM, QPSK, BPSK
- Coding Rates - 1/2, 2/3 and 3/4
- Net Throughput - 18 Mbps (7 MHz channel
size )
- Transmit Power - +18dBm
- Receive Sensitivity - -100dBm
- Antenna Beam Width - Omni
- Antenna Gain - 6 dBi
STANDARDS SUPPORTED
- Air Interface - IEEE 802.16-2004
- NLOS Enhanced Features - Uplink Sub-channelization;
Space Time Coding
- Prioritization - 802.1p (8 different
prioritization levels)
- VLAN - 802.1Q
- VoIP - SIP, MGCP, H323, CAC
- Video Broadcast - IGMP
- Security/Encryption - BS and SS
authentication via x.509 certificates, CBC-Mode 56-bit DES, AES-CCM
mode
- Interfaces - 10/100 Base T Full Duplex
- Network Management - SNMP
- International Standards - Wireless
performance ETSI EN 301 753 and EN 301 021; Antenna performance ETSI
EN 302 085 CE Compliance via European R&TTE Directive Annex IV
Self-Declaratory process
- EMC - Emissions: EN55022 (CISPR 22) to
Class B; EN61000-3-2 and EN61000-3-3
- Safety - Susceptibility: EN300 489
(includes EN61000 series); EN60950 (IEC 950): Including amendments
1-4
ENVIRONMENTAL CHARACTERISTICS
- Operating Temperature - -5°C to +40°C
- Operating Humidity - 10-90% non-condensing
- Power supply - 120-240 VAC 50-60 Hz
- Power consumption - 15 Watts nominal
- Dimensions - 4” x 6” x 2”
- Weight - 5 lbs
|
| |
|
