|
|
 |
|
Sieve RF Data
Filtering PC Software
Sieve™
is a Windows XP application that generates 40 Lambda averaged data
that was collected from Berkeley's Gator stimulus Class A transmitter and
Coyote modular receiver combination. The
transmitter/receiver/software package is being distributed to
WiMAX engineers, technicians and installers interested in
optimizing their 2.5 and 3.4 GHz networks.
Sieve™
is able to generate 40 Lambda averaged data into ASCII files
through high-speed, two-stage filtering of redundant data. This
data is received on one or two different Coyote™ receiver modules
that may be swapped out while still in the field. In addition, the
software also allows creation of KML files to map measured data
onto programs such as GoogleEarth™. When combined with powerful
BVS transmitter and receiver combos,
Sieve™
filtering software provides the best averaging options and
reliability analysis in its class.
Download Sieve
data sheet
Download Sieve
manual from the Technical support section |
| |
|
Features |
- Generate 40 Lambda averaged
data in ASCII files
- Generate the independent data
which are obtained by filtering the redundant data
- Create a KML file to map the
measured data onto GoogleEarth
- Provide averaging options and
reliability analysis
Back to Top
|
|
Specifications |
- Windows XP (SP2)
- Pentium¨ III (64 MByte RAM
required)
- 500 MHz
- 256MB RAM
- 100MB free on Hard Drive
- CD-ROM drive
- USB 1.1 Port or CF card reader
- SVGA or higher resolution
(16-bit color)
Back to Top
|
|
Frequencies |
- ISM 900-932 MHz, 2.400-2.485
GHz
- PCS Uplink (Blocks A through
F) 1850-1910
- Downlink (Blocks A through F)
1930-1995 MHz
- LMR 805-825 MHz
- MMDS 2.5-2.7 GHz
- Wi-MAX 2.5 or 3.4 GHz
- iDEN/SMR 850-870 MHz
- Cellular 824-848, 869-893 MHz
tunable in 30 kHz steps
- ETACS 872-905, 915-950 MHz
- Paging 145-165, 450-465,
928-941 MHz
- IVDS 218-219 MHz
- WCS 2.3-2.36 GHz
- 1.4 GHz (custom frequency)
- 1.5 GHz (custom frequency)
- 3.5 GHz (custom frequency)
- 5.8 GHz (custom frequency)
Back to Top
|
|
Software |
 Sieve RF data
filtering screen example
Back to Top
|
|
FAQs |
|
What frequencies does Sieve filter?
Sieve will work with any frequency that the your Coyote receiver
supports.
Do I have to use my Coyote receiver with Sieve software?
Yes. Sieve software requires calibrated Coyote hardware with GPS
and a CF storage card installed.
Back to Top
|
